TM 5-3805-293-23-2
0031
Table 1. Implement Code (2200-00 TO 2954-14) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2201-02 Right Steering Cyl- 2.
Disconnect the steering position
inder Position Sensor Data
sensor harness UA-C2 (WP 0009,
Erratic, Intermittent or Incor-
Figure 192) from left steering
rect - Continued
position sensor (WP 0009, Figure
193) (WP 0169).
3. Disconnect the steering position
sensor harness UC-C2 (WP
0009, Figure 196) from right
steering position sensor (WP
0009, Figure 197) (WP 0169).
4. Connect UA-C2 (WP 0009, Figure
192) to right steering position sen-
sor (WP 0009, Figure 197).
5. Connect UC-C2 (WP 0009, Fig-
ure 196) to left steering position
sensor (WP 0009, Figure 193).
6. Turn ignition switch and battery
disconnect switch to the ON posi-
tion.
7. Using the MSD (WP 0006), select
2200-02 Code Becomes Active -
Implement 120M and check if
Disconnect UA-C2 (WP 0009, Figure
2200-02 becomes active.
192) from right steering position
sensor (WP 0009, Figure 197).
Disconnect UC-C2 (WP 0009, Figure
196) from left steering position sensor
(WP 0009, Figure 193).
Right steering position sensor is
faulty, replace right steering cylinder
(WP 0169).
Connect the steering position sensor
harness UA-C2 (WP 0009, Figure
192) to left steering position sensor
(WP 0009, Figure 193) (WP 0169).
Proceed to step 8.
2201-02 Code Remains Active -
Proceed to Test Step 3.
8. Using the MSD (WP 0006), select 2201-02 Code Active - Repeat
Implement 120M and verify 2201- troubleshooting code from the
02 is not active.
beginning.
2201-02 Code Not Active -
Troubleshooting complete.
0031-43