TM 5-3805-293-23-2
0020
Table 1. Transmission Code (2113-03 TO 2304-06) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2201-03 Right Steering Cyl-
Test Step 9. Test for Shorted Cab
inder Position Sensor Volt-
Lower Wiring Harness.
age Above Normal -
1. Disconnect the rear chassis wir-
Continued
ing harness connector FA-C22
(WP 0009, Figure 47) from cab
lower wiring harness P-C69 (WP
0009, Figure 46).
2. Using digital multimeter, measure
Continuity - Proceed to Test Step 10.
resistance between cab lower wir-
No Continuity - Rear chassis wiring
ing harness connector P-C69
harness is shorted, replace rear chas-
(WP 0009, Figure 46) terminal 48
sis wiring harness (WP 0188).
and all other P-C69 terminals.
Connect the steering position sensor
There should be no continuity.
harness UC-C2 (WP 0009, Figure
196) to right steering position sensor
(WP 0009, Figure 197) (WP 0169).
Connect the cab lower wiring harness
connector P-C39 (WP 0009, Figure
70) to implement ECM J-2 (WP 0009,
Figure 71) (WP 0268).
Connect the cab lower wiring harness
connector P-C41 (WP 0009, Figure
68) to implement ECM J-1 (WP 0009,
Figure 69) (WP 0268).
Proceed to step 3.
3. Using the MSD (WP 0006), select
2201-03 Code Active - Repeat trou-
Trans/chassis 120M and verify
bleshooting code from the beginning.
2201-03 is not active.
2201-03 Code Not Active - Trouble-
shooting complete.
0020-92
