TM 5-3805-293-23-1
0019
Table 1. Transmission Code (1471-02 to 1961-04) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
1484-04 Inching Pedal
Test Step 2. Test for Shorted Rear
Switch Voltage Below Nor-
Chassis Wiring Harness to Trans/
mal - Continued
Chassis ECM.
1. Disconnect the rear chassis wir-
ing harness connector FA-C21
(WP 0009, Figure 124) from
transmission ECM J-2 (WP 0009,
Figure 112).
2. Disconnect the rear chassis wir-
ing harness connector FA-C20
(WP 0009, Figure 113) from trans-
mission ECM J-1 (WP 0009, Fig-
ure 112).
Continuity - Proceed to Test Step 3.
3. Using digital multimeter, measure
resistance between rear chassis
No Continuity - Proceed to Test
wiring harness connector FA-C21
Step 4.
(WP 0009, Figure 124) terminal
45 and FA-C20 (WP 0009, Figure
113) terminal 70. There should be
no continuity.
Test Step 3. Test for Shorted Cab
Lower Wiring Harness.
1. Disconnect the rear chassis wir-
ing harness connector FA-C22
(WP 0009, Figure 47) from cab
lower wiring harness connector P-
C69 (WP 0009, Figure 46).
0019-87