TM 5-3805-293-23-1
0015
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2322-02 Right Front Drive
2. Disconnect cab lower wiring P-
Motor Speed Sensor #2
C39 harness connector (WP
Data Erratic, Intermittent or
0009, Figure 70) from Implement
Incorrect - Continued
1 ECM J2 (WP 0009, Figure 71)
(WP 0268).
No Continuity - Proceed to step 4.
3. Using a digital multimeter, test for
continuity between P-C35 termi-
Continuity - Replace cab lower wir-
nal 5 (WP 0009, Figure 53) and
ing harness (WP 0266).
all circuits in P-C41 (WP 0009,
Connect AF-C1 (WP 0009, Figure
Figure 68). There should be no
61) on AH-C1 harness connector
continuity.
(WP 0009, Figure 62).
Install nose front frame cover and
rear front frame cover on machine
(WP 0224).
Connect AH-C2 (WP 0009, Figure
57) on right front drive motor speed
sensor connector (WP 0009, Figure
58) (WP 0166).
Proceed to step 5.
4. Using a digital multimeter, test for
No Continuity - Proceed to Test
Step 15.
continuity between P-C35 termi-
nal 5 (WP 0009, Figure 53) and
Continuity - Replace cab lower wir-
all circuits in P-C39 (WP 0009,
ing harness (WP 0266).
Figure 70). There should be no
Connect AF-C1 (WP 0009, Figure
continuity.
61) on AH-C1 harness connector
(WP 0009, Figure 62).
Install nose front frame cover and
rear front frame cover on machine
(WP 0224).
Connect AH-C2 (WP 0009, Figure
57) on right front drive motor speed
sensor connector (WP 0009, Figure
58) (WP 0166).
Proceed to step 5.
5. Perform Speed Sensor Test (WP
Motor Speeds Not OK, 2322-02
0023) and verify motors speeds
Code Active - Repeat
are 920 50 rpm in forward and -
troubleshooting code from the
920 50 rpm in reverse.
beginning.
Motor Speeds OK and 2322-02
Code Not Active - Troubleshooting
complete.
0015-71