TM 5-3805-293-23-1
0015
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2320-02 Left Front Drive
5. Perform Speed Sensor Test (WP
Motor Speeds Not OK, 2320-02
Motor Speed Sensor #2
0023) and verify motors speeds
Code Active - Repeat
Data Erratic, Intermittent or
are 920 50 rpm in forward and -
troubleshooting code from the
Incorrect - Continued
920 50 rpm in reverse.
beginning.
Motor Speeds OK and 2320-02
Code Not Active - Troubleshooting
complete.
Test Step 13. Test for Short to
Other AWD Circuits in Cab Lower
Wiring Harness.
1. Disconnect cab lower wiring P-
C35 harness connector (WP
0009, Figure 53) from AWD ECM
J1 (WP 0009, Figure 54) (WP
0270).
2. Disconnect cab lower wiring P-
C37 harness connector (WP
0009, Figure 55) from AWD ECM
J2 (WP 0009, Figure 56) (WP
0270).
No Continuity - Proceed to step 4.
3. Using a digital multimeter, test for
continuity between P-C35 termi-
Continuity - Replace cab lower wir-
nal 9 and all other circuits in P-
ing harness (WP 0266).
C35 (WP 0009, Figure 53).
Connect AF-C2 (WP 0009, Figure
There should be no continuity.
63) on AK-C1 (WP 0009, Figure 64).
Install nose front frame cover and
rear front frame cover on machine
(WP 0224).
Connect AK-C2 (WP 0009, Figure
59) on left front drive motor speed
sensor connector (WP 0009, Figure
60) (WP 0166).
Proceed to step 6.
0015-31