TM 5-3805-293-23-1
0015
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2320-02 Left Front Drive
5. Using a digital multimeter, test for
No Continuity - Proceed to Test
Motor Speed Sensor #2
continuity between AK-C1 termi-
Step 12.
Data Erratic, Intermittent or
nal 4 (WP 0009, Figure 64) and
Continuity - Replace left motor
Incorrect - Continued
ground. There should be no con-
speed harness (WP 0202).
tinuity.
Proceed to step 6.
6. Using the MSD (WP 0006),
2320-02 Code Active - Repeat
select All Wheel Drive 120M and
troubleshooting code from the
verify 2320-02 is not active.
beginning.
2320-02 Code Not Active - Trouble-
shooting complete.
Test Step 12. Test for Shorted
Clutch Drive Solenoid Harness.
1. Remove rear front frame cover
from machine (WP 0224).
2. Disconnect clutch drive solenoid
AF-C3 harness connector (WP
0009, Figure 51) from cab lower
wiring P-C34 harness connector
(WP 0009, Figure 52) (WP
0200).
3. Using a digital multimeter, test for
No Continuity - Proceed to step 4.
continuity between AF-C3 termi-
Continuity - Replace clutch drive
nal 12 and all other circuits in AF-
solenoid harness (WP 0200).
C3 (WP 0009, Figure 51). There
Connect AK-C2 (WP 0009, Figure
should be no continuity.
59) on left front drive motor speed
sensor connector (WP 0009, Figure
60) (WP 0166).
Proceed to step 5.
4. Using a digital multimeter, test for
No Continuity - Proceed to Test
continuity between AF-C3 termi-
Step 13.
nal 12 (WP 0009, Figure 51) and
Continuity - Replace clutch drive
ground. There should be no con-
solenoid harness (WP 0200).
tinuity.
Connect AK-C2 (WP 0009, Figure
59) on left front drive motor speed
sensor connector (WP 0009, Figure
60) (WP 0166).
Proceed to step 5.
0015-30
