0011
TM 5-3805-293-10
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
0.
ELECTRICAL SYSTEM CONTINUED
7. DOME LAMP INOPERATIVE.
Step 1.
Ensure STOP LIGHT or SER DRIVE function has been selected on military light switch (WP
a.
Select STOP LIGHT or SER DRIVE.
b.
If problem persists, go to Step 2.
Step 2.
Check for burned out or defective bulb.
a.
Replace bulb (WP 0020).
b.
If problem persists, go to Step 3.
Step 3.
Check for blown fuse at fuse panel.
a.
Replace fuse (WP 0023).
b.
If problem persists, notify Field Level Maintenance.
8. HEADLIGHT(S) INOPERATIVE WHEN SER DRIVE OR PARK FUNCTIONS ARE SELECTED.
Step 1.
Ensure SER DRIVE or STOP LIGHT function has been selected on military light switch (WP
a.
Select SER DRIVE or STOP LIGHT.
b.
If problem persists, go to Step 2.
Step 2.
Check lights for disconnected or damaged connectors.
a.
Reconnect connectors, if required.
b.
If connectors are secure or if damage is found, notify Field Level Maintenance.
9. PARKING LIGHT(S) INOPERATIVE WHEN SER DRIVE OR PARK FUNCTIONS ARE SELECTED.
Step 1.
Ensure STOP LIGHT function has been selected on military light switch (WP 0004).
a.
Select STOP LIGHT.
b.
If problem persists, go to Step 2.
Step 2.
Check lights for disconnected or damaged connectors.
a.
Reconnect connectors, if required.
b.
If connectors are secure or if damage is found, notify Field Level Maintenance.
10. HEATER AND AIR CONDITIONING INOPERATIVE.
Check for blown fuse at fuse panel.
a.
Replace fuse (WP 0023).
b.
If problem persists, notify Field Level Maintenance.
11. HIGH BEAMS INOPERATIVE.
a.
Ensure SER DRIVE function has been selected on military light switch (WP 0004).
b.
If problem persists, notify Field Level Maintenance.