TM 5-3805-293-10
0005
MESSENGER DISPLAY CONTINUED
6. The following information is available through the All-Wheel Drive System sub-sub menu:
a. ECM SERIAL #. When scrolling to this option, display shows ECM serial number.
b. ECM PART #. When scrolling to this option, display shows ECM part number.
SW PART #. When scrolling to this option, display shows software part number.
c.
d. SW RELEASE DATE. When scrolling to this option, display shows software release date.
e. SW DESCRIPTION. When scrolling to this option, display shows software description.
Service Test Sub-Menu
0005
1. MANUAL LUBE MODE TEST. When scrolling to this option, display shows option to begin manual lube mode
test.
2. STEERING DEAD ENGINE.
N OT E
Press OK when messenger displays NEXT.
a. NEXT. When scrolling to this option, display shows option to begin Steering Dead Engine test.
b. Before test can be performed, the machine must meet the following conditions:
(1) No warnings for primary steering system.
(2) No warnings for secondary steering system.
(3) No warnings for implement systems.
(4) Start switch in ON position.
(5) Engine must be off.
(6) Transmission must be in NEUTRAL.
(7) Parking brake must be engaged.
(8) Operator must be present.
(9) Implements must be locked.
c.
The following information is available through the Steering Dead Engine sub-sub menu:
(1) ABORT. When scrolling to this option, display shows option to end Steering Dead Engine test.
(2) NEXT. When scrolling to this option, display shows option to continue Steering Dead Engine test.
(3) CALIBRATION INITIALIZING. When scrolling to this option, display shows Steering Dead Engine test
has started.
d. When test begins, use left joystick to move front wheels. Secondary steering pump will be activated for a
maximum of ten seconds. To cancel test, press ABORT button on Messenger or turn start switch to the
OFF position.
Calibration
0005
N OT E
The transmission fill calibration is to be performed by Field Level Maintenance only.
Calibration could take up to 45 minutes to complete. If calibration is interrupted or aborted,
old calibration numbers will remain.
TRANSMISSION FILL CALIBRATION. When scrolling to this option, display shows option to begin transmission
fill calibration.
0005-16