ENGINETM 5-3805-263-14&P-2TURBOCHARGERDISASSEMBLY AND ASSEMBLY18. Put cartridge assembly (20) in a vise as shown.Make sure soft (brass) jaws are used.19. Install tooling (C) on the cartridge assembly tocheck end play. The end play must be .001 -.004 in. (0.03 - 0.10 mm).20. Put turbine housing (21) in positionon the tool(B).21. Put cartridge assembly (20) in position in theturbine housing.22. Put 5P3931 Anti-Seize Compound on bolts(23).23. Put locks (22) in position and install the bolts.Tighten the bolts to a torque of 115 ± 15 lb.in.(13 ± 1.7 N•m). Bend the tabs on the locksagainst the bolts.24. Put compressor housing (24) in position.25. Put locks (25) in position and install bolts (26).Tighten the bolts to a torque of 115 ± 15 lb.in.(13 ± 1.7 N•m). Bend the tabs on the locksagainst the bolts.end by:a) install turbocharger1-98
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business