Implement Controls

Machine Controls - TM-5-3805-263-14P-1_28

TM-5-3805-263-14P-1 Grader Heavy Road Motorized Diesel Engine Driven Type I (Nonsectionalized) Type II (Sectionalized) Manual
Page Navigation
25

TM 5-3805-263-14&P-1 Implement Controls Hydraulic Unloading Valve When the ambient temperature is below 160C (600F), depress and hold the control rod down, to reduce the load on the engine starter. Do not depress the control rod during normal operation of the machine. Centershift Lock Pin 1. RETRACT - Air pressure moves the pin out of the centershift hole 2. INDEX and RUN - Spring force is applied to locate the pin in the base. 3. LOCK - The pin is moved fully into the centershift hole, under air pressure. Blade Lift (Left Side) Raise - Pull the lever BACK to RAISE the left side of the blade. Hold - In the center position, the blade will not move Lower - Move the lever FORWARD to LOWER the left side of the blade Blade Sideshift Right - Pull the lever BACK to move the blade to the RIGHT. Hold - In the center position the blade will not move. Left - Move the lever FORWARD to move the blade to the LEFT. 27

Privacy Statement
Press Release
Contact