TM 5-3805-263-14&P-3
When Required
Seat Belt
Replace seat belt every 3 years
regardless of appearance.
Inspect the seat belt and mounting hardware. Replace
any damaged components.
Cooling System--Cleaning
CAUTION
If machine is to be stored in, or
shipped to, an area with below
At Operating Temperature, engine coolant is hot and
freezing temperatures, the cooling
under pressure.
system must either be protected to
the
lowest
expected
ambient
Steam can cause personal injury.
temperature, or drained completely.
Check coolant level ONLY when engine is stopped
Do
not
use
cooling
system
and radiator cap is cool enough to touch with your
conditioner with Dowtherm 209 FULL-
hand.
FILL coolant.
Remove filler cap slowly to relieve pressure.
Add .5 liter (1 pint) of cooling system conditioner per 15
liters (4 U.S. gallons) of coolant to give a 3%
Cooling System Conditioner contains alkali. Avoid
concentration of corrosion inhibitor to the cooling system.
contact with skin and eyes to prevent personal
injury.
CAUTION
Never add coolant to an overheated
Machine level, engine stopped and cool.
engine, allow the engine to cool first.
1. Turn the radiator cap slowly to relieve pressure.
3. Remove the drain plug on the water pump inlet pipe.
Remove the cap.
Allow the coolant to drain.
2. Open the cooling system drain valve and drain
4. Remove the coolant drain plugs on the transmission
coolant.
oil cooler and engine block. Allow the coolant to drain.
5-26
