TM 5-3805-263-14&P-3
BLOCKING LOCATION FOR LIFT CYLINDER
FLOW METER INSTALLED
(RIGHT SIDE)
(See Tee Test Tooling Chart for parts reference)
(See Tee Test Tooling Chart for parts reference)
NOTE: At installation of A5, loosen hose at pump,
connect A5 loosely to other end of hose, then
connect A5 to fitting on valve and then tighten.
BLOCKING LOCATION FOR LIFT CYLINDER
(LEFT SIDE)
(See Tee Test Tooling Chart for parts reference)
TACHOMETER DRIVE INSTALLED
(See Tee Test Tooling Chart for parts reference)
BLOCKING LOCATION FOR MOTOR
(See Tee Test Tooling Chart for parts reference)
BLOCKING LOCATION FOR PUMP
NOTE: Put the blade on the ground while the test is
(See Tee Test Tooling Chart for parts reference)
run.
3-80
