TM 5-3805-261-34
TRANSMISSION MAINTENANCE. (cont.)
14-13. Transmission Oil and Scavenge Pump.
(Sheet 2 of 4)
DISASSEMBLY (cont.)
1. Remove four bolts (1), washers (2), cage
(3) and seal (4) from manifold (28, Figure
14-111). Discard seal (4).
2.
Remove ring (5), coupling (6), plug (7),
bearing (8) and seal (9) from cage. Discard
seal (9).
3.
Remove two bolts (10), washers (11), four
bolts (12), washers (13) and cover (14)
from manifold (28, Figure 14-112).
4.
Remove seal (15) and two bearings (16)
from cover (14). Discard seal (15).
5.
Remove body (17) and four dowels (18)
from manifold (28).
6.
Remove gear (19, Figure 14-113).
7.
Remove manifold (20).
8.
Remove key (21) and gear (22).
9.
Remove and discard two seals
(23).
10. Remove two bearings (24) from manifold
(20).
NOTE
Do not remove ball (27) unless inspection
shows damage.
11. Remove two gears (25), dowels (26) and
ball (27) from manifold (28, Figure 14-114).
Figure 14-111.
Figure 14-112.
Figure 14-113.
Figure 14-114.
Go to Sheet 3
14-80
