WIRING AND HARNESS MAINTENANCE. (cont)

WIRING AND HARNESS MAINTENANCE. (cont) - TM-5-3805-261-34_371

WIRING AND HARNESS MAINTENANCE. (cont) - TM-5-3805-261-34_373

TM-5-3805-261-34 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
326

TM 5-3805-261-34 WIRING AND HARNESS MAINTENANCE. 4-20. Rear Blackout Light Harness. (Sheet 4 of 4: INSTALLATION 1. Position rear blackout light harness assembly (17, Figure 4-90) in vehicle. 2. Connect rear blackout light harness (17) to main blackout light harness. 3. Install rear blackout light harness assembly (17) into clip (18). 4. Install new tie strap (16). 5. Install three clips (15), washers (14) and three nuts (13). 6. Install two large clips (12), washers (11) and bolts (10). 7. Install two small clips (9). washers (8) and bolts (7). 8. Connect rear blackout light harness assembly (17) to left blackout light. 9. Install two large clips (6), washers (5) and bolts (4). 10. Install two small clips (3), washers (2) and bolts (1). 11. Connect rear blackout light harness assembly (17) to right blackout light. NOTE Return 130G Grader to original equipment condition. Figure 4-90. End of Task 4-99

Privacy Statement
Press Release
Contact