TM 5-3805-261-34
WIRING AND HARNESS MAINTENANCE.
4-20.
Rear Blackout Light Harness. (Sheet 2 of 4)
REMOVAL
NOTE
All wire, cable and harness assemblies
must be tagged before disconnecting to
aid in installation.
1.
Disconnect rear blackout light harness assembly
(17, Figure 4-90) from right blackout light.
2.
Remove two bolts (1), washers (2) and small clips (3).
3.
Remove two bolts (4), washers (5) and large clips (6).
4.
Disconnect rear blackout light harness assembly
(17) from left blackout light.
5.
Remove two bolts (7), washers (8) and small clips (9).
6.
Remove two bolts (10), washers (11) and large
clips (12).
Go to Sheet 3
4-97
Figure 4-90.