TM 5-3805-261-23-2
CIRCLE DRIVE MOTOR REPAIR - CONTINUED
0331 00
ASSEMBLY
1.
Install two bearing seats (25) and bearing (27) in hous-
ing (14).
23
2.
Install bearing (26) in housing (14). Set to depth of
2.41 in. (61.2 cm) below surface noted.
3.
Install new preformed packing (24).
24
4.
Install bearing (23) in housing (14). Set to depth of
0.10 in. (2.5 mm) below surface noted.
26
25
27
SURFACE
14
397-1533
5.
Install new seal (19), shim (18), and spacer (20) in
22
housing (14).
21
6.
Install new retaining ring (21).
20
7.
Install new seal (22).
18
19
14
397-1530
0331 00-4