TM 5-3805-261-23-2
STEERING CYLINDER REPAIR - CONTINUED
0320 00
ASSEMBLY - CONTINUED
7.
Install new seal assembly (10) and ring (8) on piston
8
9
(9).
10
397-1932
8.
Install linear actuator assembly (7).
5
6
9.
Apply thread lubricant to threads of bolt (5).
7
10.
Install bolt (5) and washer (6). Torque bolt to 720 to
880 lb-ft (976 to 1,193 Nm).
397-1931
11.
Lubricate outside of bearing (1), inside of linear actua-
1
tor cap assembly (3), and inside of cylinder tube (2)
thoroughly with hydraulic oil.
4
12.
Install cylinder tube (2).
2
NOTE
Tighten linear actuator cap with cylinder
shaft fully extended. This will keep cylin-
der, piston, and head in alignment.
13.
Tighten linear actuator cap assembly (3) to 450 lb-ft
(610 Nm) on cylinder tube (2).
14.
Install bearing (1) and two rings (4).
3
15.
Install steering cylinder (WP 0176 00).
397-1930
END OF WORK PACKAGE
0320 00-6