TM 5-3805-261-23-2
STEERING CYLINDER REPAIR - CONTINUED
0320 00
ASSEMBLY
1.
Install new seal (19) into cap (18).
2.
Install linear actuator cap assembly (3) on cylinder shaft (17).
3.
Coat ring (13), new preformed packing (12), and new
12
13
seals (15 and 16) with lubricating oil.
4.
Install ring (13), new preformed packing (12), and
14
new seals (15 and 16) in head (14).
5.
Ensure lip of seal (16) is facing toward inside of head
(14) and lip of seal (15) is facing toward outside of
15
head.
16
397-1934
6.
Install hydraulic motor head assembly (11).
11
397-1933
0320 00-5