TM 5-3805-261-23-1
SCARIFIER ASSEMBLY REPLACEMENT - CONTINUED
0264 00
REMOVAL - CONTINUED
6.
Remove nut (16), washer (15), and screw (13).
7.
Remove collar (14) from shaft (17).
8.
Remove drawbar (9) from shaft (17), move drawbar away from machine, and lower to ground.
9.
Remove sling from drawbar (9).
10.
Repeat steps 1 through 9 for right scarifier actuating assembly and drawbar connecting link.
SLING
9
17
13
14
15
16
397-854
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Scarifier weighs 434 lb (197 kg).
11.
Remove scarifier (18) using forklift truck.
18
397-2496
0264 00-4
