TM 5-3805-261-23-1
CIRCLE DRIVE SWIVEL ASSEMBLY REPLACEMENT - CONTINUED
0263 00
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Circle drive swivel assembly weighs 70 lb (32 kg).
1.
Position circle drive swivel assembly (28) in drawbar
yoke, aligning holes for four bolts (29).
2.
Install four washers (30) and bolts (29).
3.
Install pin (27) through holes in guide assembly and
30
circle drive swivel assembly (28).
29
28
397-847
25
26
4.
Install two washers (26) and new cotter pins (25) on
pin (27).
25
26
27
397-845
0263 00-6
