TM 5-3805-261-23-1
BLADE FLOAT CHECK VALVE MAINTENANCE (CCE MACHINE) - CONTINUED
0234 00
ASSEMBLY
1.
Lower temperature of seat (32).
2.
Use a 0.69 in. (17.5 mm) diameter brass rod and hammer to install seat (32) in body (19).
3.
Install pistons (33 and 27) in body (19).
4.
Lower temperature of seat (26).
5.
Use a 0.69 in. (17.5 mm) diameter brass rod and hammer to install seat (26) in body (19).
6.
Move pistons (27 and 33), checking for free travel.
7.
Install ball (31), spring (28), new preformed packing (29), and plug (30) in body (19). Tighten plug to 25 lb-ft (34 Nm).
8.
Install ball (25), spring (24), new preformed packing (23), and plug (22) in body (19). Tighten plug to 25 lb-ft (34 Nm).
9.
Install new preformed packing (43) and plug (42) in body (19).
10.
Install new seal (35) and plug (37) in body (19).
11.
Install new preformed packing (38) and plug (39) in body (19).
12.
Install new preformed packing (41) and plug (40) in body (19).
13.
Install new preformed packing (34) and plug (36) in body (19).
INSTALLATION
1.
Install mounting plate (18) on machine with four bolts
(17).
18
2.
Install blade float check valve (19) on mounting plate
17
(18) with three washers (20) and bolts (21).
19
20
21
397-672
0234 00-5
