TM 5-3805-261-23-1
BLADE LIFT LINES, FITTINGS, AND HOSES REPLACEMENT - CONTINUED
0222 00
REMOVAL - CONTINUED
40.
Remove nut (87), washer (88), two clips (86), spacer
82
(85), clamp (81), washer (80), and bolt (79) from left
83
blade lift cylinder (92).
84
81
41.
Disconnect hose assembly (76) from connector (83)
76
80
and remove preformed packing (84). Discard pre-
85
86
79
formed packing.
42.
Remove hose assembly (76) from machine.
43.
Remove connector (83) and preformed packing (82)
from top of left blade lift cylinder (92). Discard pre-
formed packing.
88 87
44.
Disconnect hose assembly (75) from connector (90)
and remove preformed packing (89). Discard pre-
formed packing.
75
45.
Remove hose assembly (75) from machine.
92
89
46.
Remove connector (90) and preformed packing (91)
91
90
from bottom of left blade lift cylinder (92). Discard
397-738
preformed packings.
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
NOTE
Lightly lubricate all preformed packings with clean oil before installation.
1.
Install new preformed packing (91) and connector (90) on bottom of left blade lift cylinder (92).
2.
Install new preformed packing (89) and hose assembly (75) on connector (90).
3.
Install new preformed packing (82) and connector (83) on top of left blade lift cylinder (92).
4.
Install new preformed packing (84) and hose assembly (76) on connector (83).
5.
Install bolt (79), washer (80), clamp (81), spacer (85), two clips (86), washer (88), and nut (87) on left blade lift cylinder
(92).
0222 00-9