TM 5-3805-261-23-1
FRONT AND REAR DEFROSTER FANS AND MOUNTING
MAINTENANCE (CCE MACHINE) - CONTINUED
0210 00
DISASSEMBLY - CONTINUED
7.
Remove outer fan guard (33) from inner fan guard (37) by detaching four hooks on outer fan guard.
8.
Remove setscrew (36) and fan (35) from motor (32).
9.
Remove tapping screw (38) and disconnect wire assembly (31) from terminal of support (24). Discard tapping screw.
10.
Remove two nuts (34), inner fan guard (37), and support (24) from motor (32).
11.
Remove brush set (39) from motor (32).
12.
Remove wire assemblies (28, 29, and 30) from terminals of resistor (27).
29
28
27
30
31
32
24
39
38
36
37
35
33
34
397-653
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
ASSEMBLY
1.
Install wire assemblies (30, 29, and 28) to terminals of resistor (27).
2.
Install brush set (39) in motor (32).
3.
Install support (24), inner fan guard (37), and two nuts (34) on motor (32).
4.
Connect wire assembly (31) and install new tapping screw (38) to terminal of support (24).
5.
Install fan (35) and setscrew (36) on motor (32).
6.
Attach outer fan guard (33) to inner fan guard (37) by using hooks on outer fan guard.
0210 00-4
