TM 5-3805-261-23-1
REAR WIPER REPLACEMENT (CCE MACHINE) - CONTINUED
0208 00
23
REMOVAL - CONTINUED
11.
Remove screws (22 and 23), two brackets (26), and
22
24
motor (8).
25
NOTE
26
Note location of nut on shaft of motor
before removing to aid in installation.
8
12.
Remove washer (25) and nut (24) from shaft of motor
(8).
397-646
CLEANING AND INSPECTION
Clean and inspect all components in accordance with WP 0020 00.
INSTALLATION
1.
Install nut (24) and washer (25) on shaft of motor (8).
NOTE
Adjust brackets to align with holes in cover.
2.
Position motor (8) and two brackets (26).
3.
Install screws (23 and 22).
4.
Install nut (20) on switch (21).
5.
Position switch (21) in cover (15).
6.
Install nut (19).
7.
Adjust nuts (20 and 19) to obtain proper shaft length of switch (21).
8.
Connect three wire assemblies (19) and wire assembly (13) to switch (21).
9.
Position cover (15) on two brackets (26).
10.
Install two screws (16).
11.
Install knob (18).
0208 00-3
