TM 5-3805-261-23-1
ROPS ACCESSORIES REPLACEMENT (CCE MACHINE) - CONTINUED
0185 00
REMOVAL
1.
Remove 12 rivets (11), roller (13), right air door (12), and gasket (14) from upper-right-rear of cab (2). Discard rivets
and gasket.
2.
Repeat step 1 for left air door.
3.
Remove two access covers (1).
4.
Remove four drive screws (3) and instruction plate (4). Discard drive screws.
5.
Remove four rivets (7), washers (6), wire rope (5), and accessories box (9). Discard rivets.
6.
Remove three rivets (7) and cover (8). Discard rivets.
13
14
2
1
3
12
11
4
10
5
6
7
7
8
9
397-2155
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
1.
Install cover (8) and three new rivets (7).
2.
Install accessories box (9), wire rope (5), four washers (6), and new rivets (7).
3.
Install instruction plate (4) and four new drive screws (3).
4.
Install two access covers (1).
5.
Install new gasket (14), right air door (12), roller (13), and 12 new rivets (11) on upper-right-rear of cab (2).
6.
Repeat step 5 for left air door.
7.
END OF WORK PACKAGE
0185 00-2