TM 5-3805-261-23-1
ROPS REPLACEMENT (TYPES I AND II MACHINES) - CONTINUED
0184 00
INSTALLATION - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
ROPS weighs 1,732 lb (785 kg).
3.
Raise ROPS (2) with lifting device and carefully
lower ROPS onto machine.
4.
Install three rear mounting bolts (3) on each side of
cab. Tighten bolts to 870 lb-ft (1180 Nm).
3
397-2484
5.
Install two lower stanchion mounting bolts (4) on each
side of cab.
4
397-2483
6.
Install seat belts (WP 0201 00).
END OF WORK PACKAGE
0184 00-5
