TM 5-3805-261-23-1
STEERING HOSES, LINES, AND FITTINGS: STEERING CONTROL PUMP TO
STEERING VALVE REPLACEMENT (SINGLE VALVE DESIGN) - CONTINUED
0172 00
REMOVAL - CONTINUED
CAUTION
Cap hose ends and plug open ports to prevent contamination.
NOTE
This procedure covers replacement of bottom-right hose assembly on steering valve. Follow these
instructions for the bottom-left hose assembly.
Tag hose assemblies before disconnecting to aid in installation.
6.
Disconnect hose assembly (1) from steering valve (2).
7.
Remove elbow (3) and preformed packing (4). Discard preformed packing.
8.
Remove bolt (5), washer (6), and clamp (7).
5,6,7
1
3,4
2
397-2263
9.
Remove bolt (8), washer (9), and clamp (10).
10.
Remove bolt (11), washer (12), and clip (13).
11.
Remove hose (14), elbow (16), and two seals (15).
8,9,10
14,15,16
11,12,13
397-2264
0172 00-2
