TM 5-3805-261-23-1
STEERING HOSES, LINES, AND FITTINGS: STEERING CONTROL PUMP
TO STEERING VALVES REPLACEMENT (DUAL VALVE DESIGN) - CONTINUED
0171 00
16
INSTALLATION - CONTINUED
17
18
17.
Install clamp (18), two washers (16), and nuts (17).
16
397-516
18.
Install steering wheel and control pump assembly (WP 0319 00).
19.
Install new strap (22) on steering console, inside of
cab.
22
397-517
20.
Start engine (TM 5-3805-261-10).
21.
Turn steering wheel to the right while moving machine slowly forward a few feet.
22.
Turn steering wheel to the left while moving machine slowly forward a few feet.
23.
Repeat steps 22 and 23 at least five times to bleed air from system.
24.
Stop engine.
25.
Check for leaks.
26.
Install frame covers (WP 0179 00).
27.
Refill hydraulic tank to proper level (WP 0216 00).
END OF WORK PACKAGE
0171 00-16
