TM 5-3805-261-23-1
STEERING HOSES, LINES, AND FITTINGS: STEERING CONTROL PUMP
TO STEERING VALVES REPLACEMENT (DUAL VALVE DESIGN) - CONTINUED
0171 00
REMOVAL
1.
For hydraulic pressure relief, ensure supplemental steering is off.
2.
Operate each implements control lever.
3.
Turn steering wheel back and forth.
4.
Remove hydraulic tank cap.
5.
Install hydraulic tank cap.
CAUTION
Cap hose ends and plug open ports to prevent contamination.
NOTE
Tag hose assemblies before disconnecting to aid in installation.
6.
Disconnect hose assembly (7) from steering valve (2).
7.
Remove elbow (6) and preformed packing (1). Discard preformed packing.
8.
Remove bolt (3), washer (4), and clamp (5).
0171 00-2
