TM 5-3805-261-23-1
TIRES MAINTENANCE - CONTINUED
0168 00
INSTALLATION - CONTINUED
NOTE
Ensure that valve core is not installed.
11.
Attach pneumatic tire inflator-gauge to valve stem (8).
WARNING
Use large tire inflation guard. Stand behind tread when inflating tires. Ensure that tires are properly seated
on rims. Correct tire pressure is 35 psi (241 kPa). Improperly seated and overinflated tires can burst with
explosive force. Failure to follow this warning may cause injury or death to personnel.
NOTE
You may have to compress tire using chains and cable hoist to get beads to seat.
12.
Place tire inside tire inflation guard. Inflate tire (6) to 35 psi (241 kPa).
13.
Remove pneumatic tire inflator-gauge and exhaust air from tire (6).
14.
Install valve core (5).
WARNING
Use large tire inflation guard. Stand behind tread when inflating tires. Ensure that tires are properly seated
on rims. Correct tire pressure is 35 psi (241 kPa). Improperly seated and overinflated tires can burst with
explosive force. Failure to follow this warning may cause injury or death to personnel.
15.
Place tire inside tire inflations guard. Inflate tire (6) to
35 psi (241 kPa).
16.
Install valve cap (4) and remove tire from guard.
17.
Install wheel (WP 0166 00 or WP 0167 00).
6
8
4
5
397-4312
END OF WORK PACKAGE
0168 00-6
