TM 5-3805-261-23-1
BATTERIES AND BATTERY CABLES REPLACEMENT - CONTINUED
0125 00
REMOVAL - CONTINUED
19.
Remove bolt (50), washer (49), and clip (48).
20.
Remove nut (51), washer (52), clip (53), and spacer (54) from under right side of cab.
21.
Remove nut (47) and washer (46) and disconnect battery cable (13) from left terminal of disconnect switch inside oper-
ator panel console inside cab.
22.
Remove battery cable (13) from right and left sides of articulation area.
47
46
48
49
13
50
51
52
53
13
54
397-377
CLEANING AND INSPECTION
1.
Clean and inspect batteries and cable assemblies in accordance with TM 9-6140-200-14.
2.
Clean and inspect all other parts in accordance with WP 0021 00.
INSTALLATION
NOTE
Feed battery cable end through floor of cab.
1.
Position battery cable (13) on right side of articulation area.
2.
Connect battery cable (13) and install washer (46) and nut (47) on left terminal of main disconnect switch inside opera-
tor panel console inside cab.
3.
Install spacer (54), clip (53), washer (52), and nut (51) under right side of cab.
4.
Install clip (48), washer (49), and bolt (50) at right side of articulation area.
0125 00-5