TM 5-3805-261-23-1
RADIATOR AND SUPPORT REPLACEMENT - CONTINUED
0052 00
INSTALLATION - CONTINUED
31
24
7.
Position four mounts (33) and brackets (34).
29
30
28
NOTE
32
Do not tighten bolts.
8.
Install eight washers (29) and bolts (28).
9.
Install eight washers (30), four bolts (31), and mounts
(33) and secure to brackets (34).
10.
Tighten eight bolts (28).
11.
Install baffle (27) (WP 0053 00).
34
33
397-164
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Radiator and support assembly weighs 310 lb (141 kg).
12.
Attach sling to left and right side of grabirons of sup-
port (24). Lift support and slowly stand on end with
sling and set into position.
13.
Install 10 washers (26) and bolts (25).
24
25
26
27
397-163
0052 00-8
