TM 5-3805-261-23-1
RADIATOR AND SUPPORT REPLACEMENT - CONTINUED
0052 00
REMOVAL - CONTINUED
43
20.
Remove two nuts (43), four bolts (39), washers (40),
and brackets (44).
38
42
21.
Support radiator (38) on wood blocks.
22.
Remove sling, four 3/8-16 in. nuts (35), 3/8-16 x 5-1/2
in. bolts (36), and link brackets (37).
44
NOTE
Remove seals only if inspection indicates
replacement is necessary.
40
23.
If necessary, remove and discard seals (41 and 42).
39
41
397-167
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
1.
If removed, install new seals (42 and 41). Cut bulk seal to size. Install seal on top and sides of radiator (38).
NOTE
Do not cover overfill tube on top of radiator.
2.
Install four link brackets (37), 3/8-16 x 5-1/2 in. bolts (36), 3/8-16 in. nuts (35), and sling.
NOTE
Do not tighten bolts.
3.
Lift radiator (38) and install four washers (40), bolts (39), and two nuts (43).
4.
Position four brackets (44).
0052 00-6
