REMOVAL - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
779

TM 5-3805-261-20 BODY, CAB, HOOD AND HULL MAINTENANCE. (cont) 13-7. ROPS Accessories. (Sheet 2 of 3) REMOVAL NOTE The following is a maintenance procedure for the left air door. The maintenance procedure for the right air door is identical. 1. Remove 12 rivets (1), roller (2), air door (3) and gasket (4, Figure 13-21) on upper, rear side of cab. Discard 12 rivets (1) and gasket (4). Remove all gasket material from mounting surfaces. 2. Remove four rivets (5), washers (6), lanyard (7) and compartment (8). Discard four rivets (5). 3. Remove three rivets (9) and plate (10). Discard three rivets (9). 4. Remove four rivets (11) and instruction plate (12, Figure 13-22) in upper, left side of cab. Discard four rivets (11). 5. Remove three plugs (13) and (14) and two grommets (15) in cab. CLEANING Clean all parts. Refer to Chapter 2. INSPECTION Inspect all parts. Refer to Chapter 2. Figure 13-21. Figure 13-22. Go to Sheet 3 13-22

Privacy Statement
Press Release
Contact