REMOVAL - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
776

TM 5-3805-261-20 BODY, CAB, HOOD AND HULL MAINTENANCE. 13-6. Dash Plate. (Sheet 2 of 3) REMOVAL 1. Disconnect instrument panel. Refer to paragraph 16-7, step 1. 2. Disconnect electronic control. Refer to paragraph 7-48, steps 3 and 4. 3. Unlatch hood fastener assembly from dash plate (10, Figure 13-19). WARNING Weight of dash plate is 70 lbs. Use adequate hoist and sling for lifting. Failure to follow this procedure may result in INJURY. If you are injured, seek medical aid immediately. 4. Install hoist and sling to dash plate (9). 5. Remove bolt (1), washer (2), nut (3), washer (4), bolt (5) and brace (6) from front of engine compartment and dash plate (9, Figure 13-20). 6. Remove two bolts (7) and washers (8). 7. Raise front of hood slightly and using hoist and sling, remove dash plate (9) and two mountings (10). CLEANING Clean all parts. Refer to Chapter 2. INSPECTION Inspect all parts. Refer to Chapter 2. Figure 13-19. Figure 13-20. Go to Sheet 3 13-19

Privacy Statement
Press Release
Contact