TM 5-3805-261-20
STEERING MAINTENANCE.
11.3.
Steering Hoses, Lines and Fittings: Steering
Valves to Steering Cylinders. (Sheet 2 of 9)
REMOVAL
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends and plug all open hydraulic
ports to prevent contamination.
1.
Disconnect hose assembly (12, Figure 11-
7) from top valve port of left steering valve
located on left side of front frame.
2.
Remove connector (1) and preformed
packing (2). Discard preformed packing
(2).
3.
Disconnect hose assembly (9, Figure 11-8)
from second valve port on top of left
steering valve.
4.
Remove connector (3) and preformed
packing (4). Discard preformed packing
(4).
5.
Disconnect hose assembly (25, Figure 11-
9) from third valve port on top of left
steering valve.
6.
Remove connector (5) and preformed
packing (6). Discard preformed packing
(6).
Go to sheet 3
Figure 11-7
Figure 11-8
Figure 11-9
11-9
