TM 5-3805-261-20
BRAKE MAINTENANCE. (cont)
9-6.
Air Compressor Lines and Fittings. (Sheet 2
of 5)
REMOVAL
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends to prevent contamination.
1.
Disconnect and remove tube assembly (1)
from elbow (2) and connector (3, Figure 9-
10) from cylinder head in air compressor.
2.
Remove elbow (2) from air compressor.
3.
Remove connector (3) and bushing (4) from
cylinder head.
4.
Disconnect and remove tube assembly (5)
from elbows (6 and 7) from transmission oil
cooler in air compressor.
5.
Remove elbow (6) from air compressor.
6.
Remove elbow (7) from transmission oil
cooler.
7.
Disconnect and remove tube assembly (8)
from elbows (9 and 10) from intake
manifold in air compressor.
8.
Remove elbow (9) from air compressor.
9.
Remove
elbow
(10)
from
air
intake
manifold.
10.
Remove two oil pressure sending units from
cross lubricant line, refer to paragraph 7-90.
Figure 9-10
Go to Sheet 3
9-18