INSTALLATION - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
686

TM 5-3805-261-20 BRAKE MAINTENANCE. (cont) 9-5. Air Compressor. (Sheet 6 of 6) INSTALLATION (cont) 18. Install elbow (9, Figure 9-3) on air compressor (27). 19. Connect tube assembly (8) to elbow (9). 20. Connect tube assembly (8) to air compressor (27). Tighten connections. 21 Connect hose assembly (5) to supplemental steering motor on front, left inside of engine compartment. 22. Install new preformed packing (7)and connector (6). 23. Install new preformed packing (4), connector (3) and elbow (2). 24. Connect hose assembly (1). 25. Refill cooling system to proper level. Refer to paragraph 6-49. 26. Refill hydraulic system to proper level. Refer to LO 5-3805-261-12. 27. Check all hose and tube connections. 28. Start engine. Refer to TM 5-3805-261-10. 29. Run engine for two minutes. Stop engine. NOTE Return 130G Grader to original equipment condition. Figure 9-3 End of Task 9-16

Privacy Statement
Press Release
Contact