TM 5-3805-261-20
BRAKE MAINTENANCE. (cont.)
9-4.
Service Brakes. (Sheet 3 of 3)
ADJUSTMENT (cont.)
NOTE
If
pedal
hits
platform
before
maximum stroke of valve is felt, turn
screw out one turn.
10.
Turn stop screw (7) up until contact is made
with pedal (1,Figure 9-2) in depressed
position.
11.
Release pedal (1).
12.
Tighten nuts (6 and 4). Do not turn stop
screw (7) and screw (5) after nuts (6 and 4)
are tightened.
13.
Depress pedal (1) and release. Check to
insure valve is exhausting when pedal (1) is
up, there must be 0 psi at tandem.
NOTE
Return 130C Grader to original equipment
condition.
Figure 9-2
End of Task
9-10