TM 5-3805-261-20
TRANSMISSION TROUBLESHOOTING AND MAINTENANCE PROCEDURES.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
b.
TRANSMISSION DOES NOT SHIFT.
Step 2. Check the speed control and forward-reverse cables (1 and 2, Figure 8-2). Cables should be taut without
any slack, and all nuts and rod ends tightly secured.
Figure 8-2.
If linkage is loose--tighten. Refer to paragraph 8-6.
If linkage is damaged or defective--replace. Refer to paragraph 8-6.
Step 3.
Contact Direct Support.
8-5
