TM 5-3805-261-20
TRANSMISSION TROUBLESHOOTING AND MAINTENANCE PROCEDURES.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
a.
TRANSMISSION DOES NOT OPERATE IN ANY SPEED OR SLIPS IN ALL SPEEDS.
Step 2. Check the speed control and forward-reverse cables (1 and 2, Figure 8-2). Cables should be taut without
any slack and all nuts and rod ends tightly secured.
Figure 8-2
If linkage is loose-tighten. Refer to paragraph 8-6.
If linkage is damaged or defective--replace. Refer to paragraph 8-6.
Step 3. Contact Direct Support.
8-3
