TM 5-3805-261-20
DOME LIGHT MAINTENANCE.
7-68.
Dome Light Switch. (Sheet 2 of 3)
REMOVAL
1.
Remove two screws (1, Figure 7-95) from
front,
upper
right
of
cab
storage
compartment.
2.
Remove lock nut (2).
3.
Remove lockwasher (3).
4.
Remove instruction plate (4).
5.
Remove two nuts (5).
6.
Remove ring (6) and nut (7, Figure 7-96)
from switch (11).
7.
Remove three screws (8) and lockwashers
(9).
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
8.
Disconnect three wire assemblies (10) from
switch (11).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-95
Figure 7-96
Go to Sheet 3
7-163
