TM 5-3805-261-20
MISCELLANEOUS ELECTRICAL MAINTENANCE.
7-38.
Hourmeter. (Sheet 2 of 2)
REMOVAL
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
1.
Disconnect wire assemblies (1 and 2,
Figure 7-54).
2.
Remove two nuts (3) from hourmeter
assembly (5).
3.
Remove clamp (4).
4.
Remove hourmeter assembly (5) from
instrument panel (6).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install hourmeter assembly (5) in instrument
panel (6, Figure 7-54).
2.
Install clamp (4).
3.
Install two nuts (3) in hourmeter assembly
(5).
4.
Connect wire assemblies (2 and 1).
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 7-54
End of Task
7-101
