TM 5-3805-261-20
STEERING CONTROL CONSOLE SYSTEM MAINTENANCE. (cont)
7-24.
Steering Control Console Cover. (Sheet 3 of 3)
ASSEMBLY
1.
Install new seal (6) to cover (7, Figure 7-
41), if removed. Cut to size from bulk seal.
2.
Install red lens (5), four amber lenses (4)
and two green lenses (3) on cover (7).
Apply a light thin coat of PVC adhesive to
outer diameter of lens holes in cover (7).
Apply to backside of cover only.
3.
Install four nuts (2) in panel (1, Figure 7-40).
4.
Position and install items 7 thru 3 as an
assembly on items 2 thru 1 as an assembly.
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 7-41.
Figure 7-40.
End of Task
7-72
