TORQUE LIMITS FOR FLARED AND PREFORMED FITTINGS

TORQUE LIMITS FOR FLARELESS FITTINGS - TM-5-3805-261-20_1211

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
1158

TM 5-3805-261-20 APPENDIX E. (cont.) TORQUE LIMITS. (cont.) c. TABLE E-3. TORQUE LIMITS FOR FLARED AND PREFORMED PACKING FITTINGS USED WITH STEEL TUBING. The torque values shown in Table E-3 are to be used with 37 degree flared, 45 degree flared and inverted flared fittings (when used with steel tubing), preformed packing plugs and fittings. The torque required for these fittings are based upon thread size. TABLE E-3. TORQUE LIMITS FOR FLARED AND PREFORMED FITTINGS USED WITH STEEL TUBING Tube O.D. Thread Torque Tube O.D. Thread Torque (Inch) Size LB-IN (Inch) Size LB-FT Inch Inch .500 7/8 35-45 .625 7/8 35-45 .125 5/16 35-55 .750 1 1/16 50-60 .188 3/8 90-110 .875 1 3/16 60-70 1 1/4 .250 7/16 125-165 60-70 .312 1/2 155-195 1.000 1 5/16 75-85 .375 9/16 165-245 1.250 1 5/8 90-100 5/18 165-245 1.500 1 7/8 110-130 2.000 2 1/2 210-250 E-3

Privacy Statement
Press Release
Contact