TM 5-3805-261-20
SCARIFIER ASSEMBLY MAINTENANCE. (cont.)
17-11.
Scarifier Assembly. (Sheet 8 of 9)
INSTALLATION
11.
Lift drawbar (14), aligning holes in drawbar
(14) with holes in scarifier block (15, Figure
17-37).
12.
Install four washers (9), bolts (8) and nuts
(7).
13.
Remove hoist and sling.
NOTE
The
following
is
a
maintenance
procedure for the left-side scarifier
actuating
assembly.
The
maintenance procedure for the right-
side scarifier actuating assembly is
identical.
14.
Remove two bolts (1), washers (2), cap (3)
and shim(s) (4, Figure 17-35).
15.
Move link (5) of scarifier actuating assembly
away from ball (6) of drawbar frame and
position socket of link (5) over drawbar ball.
Figure 17-37.
Figure 17-35.
Go to Sheet 9
17-36
