TM 5-3805-261-10
OPERATION UNDER USUAL CONDITIONS - CONTINUED
0005 00
OPERATE STEERING - CONTINUED
3.
In the event of steering system failure, perform the following:
a.
Stop machine in a safe location.
b.
Apply parking/emergency brake.
c.
Shut down engine and troubleshoot malfunction.
d.
DO NOT operate machine until problem has been corrected.
For wheel lean and articulation descriptions, see Traveling and Earth Moving Operations in WP 0006 00.
4.
ENGINE SHUTDOWN
0005 00
CAUTION
Stopping engine immediately after it has been operating under a load can result in overheating and
accelerated wear of engine components.
The following shutdown procedures allow engine to cool. This will prevent excessive temperatures in
turbocharger center housing. Failure to shut down engine properly may cause premature engine failure.
1.
Run engine at low idle for 5 minutes.
2.
Turn off machine lights and accessories.
3.
Pull accelerator pedal toward operator seat to shut down engine. Do not try to shut down engine with battery disconnect
switch.
AFTER OPERATION
0005 00
Perform After operation PMCS (WP 0013 00).
1.
2.
Turn battery disconnect switch to left (OFF) position.
3.
Remove key from battery disconnect switch.
4.
Close and lock doors and windows (if equipped).
END OF WORK PACKAGE
0005 00-7
