24. Remove two bolts (Figure 11, Item 1) and washers (Figure 11, Item 2) from AWD piston motor (Figure 11,
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
AWD piston motor weighs approximately 100 lb (45.5 kg).
25. With assistance, remove AWD piston motor (Figure 11, Item 4) and O-ring (Figure 11, Item 3) from machine
and lower onto a flat surface. Discard O-ring.
N OT E
Tire removed for clarity in Figure 11.
Figure 11. All-Wheel Drive Piston Motor.
END OF TASK