Remove the screw jacks from the rear frame
and store in the tool box.
Attach the articulation indicator cable.
Connect the air lines, articulation cylinder lines
and mechanical push/pull cables on each side of
the machine. Use a round ended tool to relieve
pressure in the air hoses if necessary. Clamp
the hoses to each side of the front frame.
Reconnect all dust caps.
If trouble is experienced when attempting to
connect articulation cylinder lines, relieve
pressure in the lines. To relieve pressure,
slightly loosen the fittings in the rear of the
lock valve to allow the pressure to leak out.
Tighten the fittings and connect the lines.
Use adequate eye protection when disconnecting
pressurized lines. Dust, fluid or other foreign matter may
be blown into eyes.