OPERATOR/CREW PREVENTIVE MAINTENANCE CHECKS AND SERVICES
B - BEFORE
D - DURING
A - AFTER
W - WEEKLY
M - MONTHLY
ITEM TO BE INSPECTED
EQUIPMENT IS NOT
PROCEDURE:CHECK FOR AND HAVE REPAIRED,
FILLED, OR ADJUSTED AS NEEDED
Perform weekly as well as before EMCS if:
You are the assigned operator but have not operated
grader since the last weekly.
You are operating the grader for the first timre.
MAKE THE FOWALK AROUND CECKS:
EXTERTOR OF VEHICLE
Visually check for evidence of leakage (oil, fuel, hydraulic
Class III leaks
fluid, or coolant) on or under the grader.
Visually check tires for damage or low pressure (correct
Tires have cuts or
pressurs is 35 psi - 240 Kpa). Reference TM 9-2610-201-14
abrasions which could
result in tire failure
during operation. One
or more tires missing or
Check moldboard for worn, missing or broken cutting
Missing or broken
edges and end bits.
cutting edges or worn
within 1/2 inch-of mold
Check scarifier for missing or broken teeth/hanks.
Check rollover protective structure (ROPS) for damage or
Cracked welds, buckled
or slit seams & loose or